mine came with Dunlops, did 400 miles then ditched them, they were dire in the wet and not that great in the dry, no feedback from them at all.
stuck Conti RoadAttack 3’s on and much happier, did 300 miles last Sunday, mostly in the rain, and they were excellent
Sent from my iPad using Tapatalk
that’s my video, and that was the 2nd one I’ve done so far, on my MT09 and Tracer 900, just got another MT09 so will be doing it again.
the easiest way to do this mod is to cut the bottom off leaving the shroud mounts in place. you can do everything off the bike then.
there’s also a video of the...
you heard the original with stock exit pipe Luke, that still sounded great, but this time it's 2" straight through [emoji16]
Sent from my iPhone using Tapatalk
ok, tested the Oxford grips with Yamaha oem wiring, it worked BUT the grips didn't get hot enough even on full, guess the oem grips need less power, might try R&G grips next [emoji848]
Sent from my iPhone using Tapatalk
any aftermarket grips should work with the Yamaha wiring, you just need Yamaha type C connectors, available on ebay. I did the same mod on my Hyperstrada, grips worked off the Ducati wiring and controlled by the start button.
didn't have time today but will try to get it done tomorrow
Sent...
the connectors for the OEM grips are behind the right side tank panel, I'm about to do this with Oxford grips, already have the Yamaha Type C connectors
Sent from my iPhone using Tapatalk
cautionary note:
if you buy a spare exhaust to modify make sure it's the correct one. Tracer and MT09 exhaust look the same but the shroud and shroud mounts are different. The MT09 exhaust fouls against the center stand on the Tracer but the Tracer exhaust will fit straight onto an MT09.
a...