sprocket


  1. stevecbr

    Changed the chain and sprockets at 29500 miles

    Changed the original chain & sprockets last night, chain was getting tightspots, and setting the chain slack at the tight spot meant I was getting about 50mm slack at the loose spots! Used one of those cheap ebay breaker/riviter tools (about £12) and everything went well, soft link flared out...
  2. Bookerman

    Soon to be MT09 owner, intro and sprocket Q

    Hi all, new to the forum, pick up my 2014 MT09 tomorrow, can’t wait :-) I am a long time Fazer 600 owner. Quick question to start though if you’ll indulge me. The bike has a new rear sprocket fitted and from what I can tell it is an increase in size. The original sprocket comes with the bike...
  3. D

    Loobman fitting advisory

    The Loobman on an MT-09 needs a bit of adjustment as the swing arm design means it ends up being too far away from the sprocket I did a quick YouTube to explain where you need to change it. It's not much to do Here's the final video showing placement I chose. Not a lot of option there I...
  4. LewFZ1

    Cleaned chain today

    Nothing strange about cleaning the chain. I had a good go at it today removed the front sprocket cover for the first time since I owned the bike. I run with a Tutoro oiler which is a great bit of kit.I was amazed though at the amount of oily residue around the front sprocket and engine casings...
  5. S

    Tracer chain adjuster blocks

    I've just adjusted the chain on my tracer only to find on the sprocket end of the spindle turns against the block marking it and also tightening the chain as it spins,I've got round it by holding the sprocket end with an adjustable spanner while my daughter tightened the nut which I've done to...
  6. MartinB

    17 Tooth Front Sprocket ?

    Guys and Girls Anybody know where I can get a 17 tooth front sprocket for a MT09? I know what it does, and the implications of such a mod, but I still want to try it. Thanks all
  7. Banksy

    Speedo pick up and gearing..

    Doing a chain and sprocket change on the bike soon and was thinking of going down one on the front sprocket.. I know the speedo over reads at the mo. Am I right thinking going down one on the front will make this worse? Where does the speedo pick up its signal from? ECU or a gearbox or wheel...
  8. marksim

    Rear sprocket thingy

    Maybe been abit daft here, but whats the black ring guard thingy that connects to the rear sprocket ? Is it just to stop muck etc from getting everywhere or does it have a more meaninfull purpose
  9. marksim

    Sprocket sizes

    Has anybody tried different sprocket sizes and the race setup 1 less on front and 1 extra on rear ? Im thinking of dropping a tooth on the front as this is what i tend to do with all my bikes. Just wondered if anybody had tried.


Top