Recent content by robin

Stainless steel radiator guard for a 2016 Tracer 09. Say £20. Email me please. Robin. SOLD.

I had a Sena 20s that I’ve just changed for a Sena Momentum Helmet. It has a Sena 20s integrally fitted with a larger battery, 20hrs. It works very well, no matter what speed and the caller doesn’t even know your on a bike.

Great job. How does it get on in the rain?

I went into Stockton today to get a key cut on the market. I already had a blank. I only wanted a spare for working in the garage with no chip in it. When he saw my spare key he said do you want a chip in it. I said that’s one of the things that’s not been possible for a long time. 2 secs...

Your chain defo wants oil. It’s dry as a bone! I use TUTORO Automatic Motorcycle Chain Oilers – TUTORO Ltd. It works off vibration of the bike. You can set it to one drip every 45secs and there isn’t too much spray. I use chain saw oil from B&Q. Or just engine oil. The chain is always wet...

Sorry entered in wrong post.

There is a hole for another power socket on the other side. It can be wired to battery or the ignition spare leads behind the clocks.

Yamaha MT09 Water Pump | eBay Or a cover Yamaha MT09 RHS Engine Oil Pump Cover | eBay

To raise the front of my front seat I slotted an inch length of tube into the front round rubber feet that the seat sits on. The front tab that sits in the slots in front of the tank now sits above the top slot, so I made a z shaped piece of flat metal. Bolted it to the nut at the bottom with...

I’ve got one on mine! Very good! I also lifted the front by an inch and put the rear in lowest position!

And will it heat my garage when I’m working?

Well that’s something that’s seems to be not available. Can you make your own, out of that clear plastic stick on sheeting?

You won’t kneed any upgrade to keep up with a 600RR.

Probably White wire. Stick a pin in it and test it with electric screw diver. Switch on and off to see if it’s ignition live! Because you stuck a pin in it/ thro it. The hole should be small enough not to matter if worried put some tape on it.

MT09Tracer ‘66. Yesterday I took shock absorber and linkages off so as to grease them.everything went great. A bit fiddly but managed it OK! On inspection the linkage relay arm is getting rubbed away by the links, as shown in picture, between red dots. I think it on Right hand side.