Hello & Welcome to our community. Is this your first visit? Register

User Tag List

Thanks Thanks:  0
Likes Likes:  3
Dislikes Dislikes:  0
Results 1 to 7 of 7
  1. #1
    Member
    Join Date
    Nov 2016
    Posts
    51
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)

    MT10 or suspension?

    As much as i love my MT09, being a heavy lad, I do find the suspension too soft and bouncy, So i'm looking at two options:

    Maxton suspension all round, cheaper option (than the other!)

    Trade-in and get an MT10 (more expensive but better long term?)

    Anyone done the suspension upgrade and found it made the bike that much better? or has anyone gone from MT09 to MT10?

  2. #2
    Member
    Bike
    MT09 Tracer
    Join Date
    Nov 2016
    Location
    Derbyshire
    Posts
    34
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    depends how you use the bike. If its just a weekend blast then the MT10 is good.... the tank range makes it a pain over longer trips though. The 09 is a much more practical bike.

  3. #3
    Junior Member stevierst's Avatar
    Bike
    XSR900/Fazer600
    Join Date
    Mar 2016
    Location
    Blackpool
    Posts
    12
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    I had a go on the mt10 when I took my xsr9 in for a service. All seemed awesome with the 10 as I took it for a mandatory gentle ride for the afternoon as you do. First thing I noticed was WHEELIE!!!!!!!!!!!! In the first three gears!!!!!
    It handled just as my XSR did, maybe a slight bit slower steering, and it felt heavier. Ergonomics were similar, and it was as comfy as mine........... but.

    I only took it for a 70 mile ride, and the fuel light started blinking. WTF, 24mpg?????? My 3 litre jaguar does better on fuel than that!

    When I took it back and collected my XSR, I felt at home again. Iíll be absolutely honest, the 9 felt just as good as the 10 up to Ďreasonable speedsí. It didnít try to kill me every time I opened the taps, and 50 mpg felt sooooo much better!

    In my humble opinion, spend a grand on suspension, youíll end up spending that extra on fuel in 12 months if you get the 10, and your simply not gaining enough in my eyes.

    Apart from that, itís got a butt ugly face only a mother could love!


    Sent from my iPad using Tapatalk

  4. #4
    Senior Member trevorleigh's Avatar
    Bike
    MT-09 & MT-09 Tracer
    Join Date
    Oct 2013
    Location
    Hampshire, England
    Posts
    233
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Quote Originally Posted by yorkshiremt09lad View Post
    As much as i love my MT09, being a heavy lad, I do find the suspension too soft and bouncy, So i'm looking at two options:

    Maxton suspension all round, cheaper option (than the other!)

    Trade-in and get an MT10 (more expensive but better long term?)

    Anyone done the suspension upgrade and found it made the bike that much better? or has anyone gone from MT09 to MT10?
    I have an early MT09 with MAXTON suspension all round, totally transforms the bike, and they will set it to suit your weight, I have had a couple of MT10 test rides and although it is a great bike for road use I think a nine with the suspension done is just as good. The other option of course is the new MT09SP, with the better suspension!

  5. #5
    Member
    Join Date
    Nov 2016
    Posts
    51
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Quote Originally Posted by trevorleigh View Post
    I have an early MT09 with MAXTON suspension all round, totally transforms the bike, and they will set it to suit your weight, I have had a couple of MT10 test rides and although it is a great bike for road use I think a nine with the suspension done is just as good. The other option of course is the new MT09SP, with the better suspension!
    Thanks for that, I've just put my order in at Maxton so will look forward to getting it fitted and putting a review up.

    I just find the triple in the '09 too nice to replace with anything else!

    I did look at the SP, but as much as it's being touted with Ohlins, it's actually only the rear shock and i think a full custom maxton setup will be better than a factory ohlins / kyb setup

  6. #6
    Junior Member
    Join Date
    May 2017
    Posts
    14
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    I'm going the Maxton route later this year. I ride fairly hard and find the standard forks and shock tie the bike in knots when I'm pushing through some of the local roads I ride regularly.

  7. #7
    Member
    Join Date
    Nov 2016
    Posts
    51
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    I thought i'd give it a few weeks and a few different rides so the review was more informed so here we go.

    I got the Maxton NR4 rear shock and GP20 cartridges, both set up for my weight (in full riding gear) which was about 17.5 stone fully kitted up, they were fitted by me and have been on about a month.
    Richard at Maxton was fantastic throughout, everything was explained, costs agreed and order put it. it took about three weeks for the parts to be made and I drove down for the one-day turnaround for cartridge fitting on the forks.

    Since fitting i've had multiple rides, lots of commuting and since the snow, lots of very, very badly potholed yorkshire roads. I'm so glad i didn't buy an MT10...

    the maxton shock raises the rear of the bike by about 15mm, it's not a lot but it does put more of your weight over the front end, it's fully adjustable back to stock height or higher if you like, i found i wanted the shock a tiny bit stiffer, so one full turn on the shock did the trick, and you get a special tool from maxton so it's way easier than adjusting the Yamaha shock.
    General riding/commuting is massively improved, the bike no longer bounces and wallows, on speed bumps it absorbs the difference and settles straight away rather than bouncing back and forth, and on bumps and holes, it absorbs everything with a lovely plush firmness.
    When riding with a bit more 'spirit' the bike just sinks into corners, like it's sucked to the ground, braking going into a corner is so much more settled and once the front end is compressed, it stays there, and is absolutely planted, even if the surface is a bit uneven.
    I've not done any very fast riding/peg scraping due to road conditions and temperatures, but i'm absolutely confident it'll be a better experience.
    Braking feels a lot nicer too as i feel i can really grab the lever now and the bike stays level and solid rather than pogo-ing back when i release.

    All in all it's like a different bike, the suspension now matches the engine and riding just seems to flow so much nicer, flicking the bike around bends and left-to-right feels very fluid rather than springy.
    Ok so the big one everyone will want to know.... yes, it was £1300 quid, but I now have no doubts i'll be keeping the MT09 for a long time, and with the newly fitted HH pads, I really can't think of anything i could do to make the bike better for my needs. In fact i've increased my gym and core-training to make sure i can keep up with what the bike can do!

    Obviously it's a glowing recommendation for Maxton, and the only downside is the cost, but looking at that next to the cost of an upgrade - which may or may not be suited to me personally, i'd go for the improvements to the bike to make it 'mine'

    Hope that helps anyone looking to upgrade (or having problems with the standard suspension) and if i can answer any questions, i'm happy to.


 

 

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
All times are GMT -7. The time now is 08:13 AM.
Powered by vBulletin® Version 4.2.5
Copyright © 2018 vBulletin Solutions Inc. All rights reserved.
Search Engine Optimisation provided by DragonByte SEO (Pro) - vBulletin Mods & Addons Copyright © 2018 DragonByte Technologies Ltd.
User Alert System provided by Advanced User Tagging (Lite) - vBulletin Mods & Addons Copyright © 2018 DragonByte Technologies Ltd.
Feedback Buttons provided by Advanced Post Thanks / Like v3.6.3 (Lite) - vBulletin Mods & Addons Copyright © 2018 DragonByte Technologies Ltd.
Original Poster In Postbit provided by Original Poster In Postbit v1.0.0 (Free) - vBulletin Mods & Addons Copyright © 2018 DragonByte Technologies Ltd.


MT09.motorcycle-talk.com is not associated with Yamaha in any way. We are an enthusiast site dedicated to the Yamaha MT-09 / FZ-09 motorcycles. Our goal is to offer a place for Yamaha FZ09 / MT09 owners to discuss rides, events, mods, maintenance, purchasing, etc.

vBulletin Skin By: PurevB.com