throttle


loneranger

Member
Joined
Jan 26, 2014
Messages
128
Reaction score
0
Points
16
Location
UK
How do you minimise the sideway movement on my throttle. I have a washer floating inside but there is to much slide from some to side? Any ideas
 

CountP

New member
Joined
Mar 5, 2018
Messages
1
Reaction score
0
Points
1
Location
Gold Coast Queensland Australia
This was bugging me as well. I fitted an oring that had the same id as the bar and a thickness that would just allow a tiny amount of sideways movement so as not to bind the throttle. Placed the o ring on the inner side of the plastic washer.
It is possible to stretch three oring over the grip.
 


Top