Tilt Sensor Connector


trevorleigh

Member
Joined
Oct 7, 2013
Messages
236
Reaction score
0
Points
16
Location
Hampshire, England
Hi All

Does anyone here know where I might be able to get a replacement connector plug for the tilt/cut out sensor, as I have had a little mouse issue and he decided to eat some of my wires.

It is the white plastic piece in the photo, from Yamaha it is all part of the main loom, my local dealer is trying to find one for me but if they cannot I will need a new connector plug and solder on some longer wires so it can be connected back to the loom, as obviously it currently does not run.

I seem to remember someone on here mentioning that all of the OE connector were available somewhere.
Connector.jpg
 

trevorleigh

Member
Joined
Oct 7, 2013
Messages
236
Reaction score
0
Points
16
Location
Hampshire, England
My local dealer has sorted the issue for me, they found a plug on an old loom they removed from another bike, cut of the plug and soldered it back on to my bike. Job done and bike now running again ��
 


Top