Search results

im talking up and down. If you pull the bike over on the side stand so the back wheel is off the floor, grab the wheel and pull up. There is some movement

The MT09 as just had mot by a new tester. It passed but had an advisory for play in rear suspension linkage. I checked it out and could see the movement seemed to be from the dogbone links to the aluminium crank or linkage. Changed bearing and movement exactly the same. Now 3 bearings all with a...

The MT09 as just had not by a new tester. It passed but had an advisory for play in rear suspension linkage. I checked it out and could see the movement seemed to be from the dogbone links to the aluminium crank or linkage. Changed bearing and movement exactly the same. Now 3 bearings all with a...

Tall or flat seat for MT09. Good condition £50.00. Not on hear very often so email. Me if intrested

Which rear shock fit the MT09 Got a 2017 Zx10r rear shock that's done 1k miles

Thanks. Give the a lick of paint after some fine masking.

Anyone?

Can the mirror head be removed from the stem. As you can see got a bit of corrosion on the stem so would like to remove the mirror head and re-paint the stem

dont fancy gluing a piece to the throttle tube ( seen the youtube vids ). But a throttle tube from a 2015 on R1 will fit straight into the housing and give about 80 -85 degree. There is a company on ebay producing a throttle sleeve out of alloy for £59.49 but you can buy oem R1 tube with the...

I stuck some HH rated pads out of my R1 in and big difference to stock GG. MY CARTRIDGE KIT SUPPLY AND FIT WAS £799.00

i put the full cartridge kit in. Comp in one leg rebound in the other.

Got the razor shock and the k-tec fork kit. It's a must do.

did a search but can find what im after,The throttle tube on the 2014 mt09 is 38MM diameter. As anyone swapped the throttle tube over form another Yamaha model to get a reduced turn. Seen some one using R6 tube on the MT07. I have seen active do a qat with a 44mm diameter tube but dont want to...

had mine flashed with woolwich and had quick shifter and auto blipper fitted at same time. the shop were surprised that top speed limited for a medium power bike. Yet to ride it yet but will let you all know when i do.

thanks for the reply mt09 smurf. Looking at the bolts around the suspension they didnt look like they had been disturbed so I was confused to see the marks. thought a different linkage may have been fitted. Bikes in for a dyno and custom map 5/6/17 and may go silly and get the race package...

Anyone able to check if there dog bones have the letters on its a 2014 model

Potching around the bike today and decided to add a little extra rear ride height. When I was adjusting the shock a saw the letters IRC stamped int the dog bone / suspension link, Is this a stock item or as the p[previous owner changed them. Also the lamba sensor was disconnected ?. is there...

stock gg pads are erm. Put a set of HH pads out of my 15 R1 in the empty and what a difference..

Have got my reservoir turned enough to have the hose free of the frame. Are you saying the K-Tech shock out of the box is shorter then stock. I put my stock against the K-Tech before fitting and they were the same.I did ask K-Tech if the razor shock at a top out spring and they said no. So 4mm...

Picked up a low mileage 14 plate MT09. After just 5 miles realise the suspension is utter crap. so three days later K-Tech razor shock and K-Tech ids cartridge kit. Now much better, but in A mode the throttle snatch still tends to push me a little wide as the front goes light. I raised the forks...