tube


  1. barton

    quick action throttle

    did a search but can find what im after,The throttle tube on the 2014 mt09 is 38MM diameter. As anyone swapped the throttle tube over form another Yamaha model to get a reduced turn. Seen some one using R6 tube on the MT07. I have seen active do a qat with a 44mm diameter tube but dont want to...
  2. P

    Akrapovic baffle removal

    Just thought I'd share with you all the method I used to pull the baffle out, after trying all the suggestions I found on line apart from removing the silencer all together none worked for me. Looking around my garage for ideas I thought I'd try an internal bearing puller. I bought a kit on my...
  3. razz

    Have cut my high level akra

    Had a spare half hour , so bit the bullet n cut the pipe , had to cut the original hanger off and using a temp hanger , a steel tube joiner , it's nearly done , if all works out OK on the road , I'll get a stainless tube on there and weld it up to remove the temp joiner n clamps
  4. R6owdlad

    Shock tube

    Anyone got one of these? What's are your opinions of them? Cheers Tony
  5. Locksmith

    Forks question

    As you probably know I've put ohlins springs in my forks !!! My question is, I'm using the cable tie method to see how much travel I'm using. Is the bottom of the chrome tube the actual suspension bottom point or is it a few mm upwards (or more) The tie is currently around 15mm from the bottom...


Top