Ecu flash

[Triple Trouble]

So tt I've got kevs O2 unit plugged in to alter closed loop. Will I have to take this off again when it's flashed?

If you have the closed loop system disabled you can sell the O2 sensor because you won't need it

 

[Colin Briffett]

Ok thanks tt

 

[Clint Kingston]

The flash is well worth doing. I bought the bench flashing kit as i can also flash my Super Tenere so it was worth the investment.

Disabling the o2 sensor, and enabling the injectors on Deceleration makes a massive difference to the bike. removing the restrictions in 5th and 6th also makes a huge improvement in power on the motorway.

 

[Colin Briffett]

Thanks for that Clint I am definitely getting it done soon!

 

[catchacloud]

Anyone know if there is a dealer in Hong Kong ?

 

[Triple Trouble]

Have a look here....

https://ftecu.com/flash-tune-dealers/

 

[R6owdlad]

If you have the closed loop system disabled you can sell the O2 sensor because you won't need it

Is it ok to leave the O2 sensor on when you've had the flash done-only to save messing about taking it off?

 

[Triple Trouble]

Is it ok to leave the O2 sensor on when you've had the flash done-only to save messing about taking it off?

Yes of course. You can always disconnect it and tape it up if you really want to

 

[catchacloud]

That's a no then .....

 

[Triple Trouble]

Please see post #21

 

[Clint Kingston]

My closed loop has been disabled for a while, there is no issue leaving the sensor plugged in and installed in the pipe.

I have the plug for the pipe laying around somewhere eventually i will get around to installing it to clean up the looks

 

[Dracones]

Does anyone know if Simon Tyler is still working with S-Tec Performance and if so what their address is?
I would also like to know how much I need for a ECU Flush for my 2014 MT-09.
Thank you for your support!
Cornel