G’day from Brisbane Australia


Lucky

New member
Hi all, Mark (“Lucky”) here from a very warm 33deg.C Brisbane. The photo below is of my 2015 Tracer on the way to beautiful Somerset Dam, north west of Brisbane.
5829

Bike mods include:
Andreani fork cartridges
Nitron R1 Shock
Acropovic Titanium pipe
Woolich Racing Map by Procycle Dyno - 122Hp
McCruise
OEM Heated Grips
Givi Monokey Top Box
Puig racing screen
....and lots more
 

DaveC

New member
Welcome.
122hp is quite an improvement over stock power, great job.
It is rather quiet here, which is a shame.
 

Raw0791

New member
Hi all, Mark (“Lucky”) here from a very warm 33deg.C Brisbane. The photo below is of my 2015 Tracer on the way to beautiful Somerset Dam, north west of Brisbane.
View attachment 5829

Bike mods include:
Andreani fork cartridges
Nitron R1 Shock
Acropovic Titanium pipe
Woolich Racing Map by Procycle Dyno - 122Hp
McCruise
OEM Heated Grips
Givi Monokey Top Box
Puig racing screen
....and lots more
Hi Lucky, did you do the woolich racing map or buy bike with it? Would love to speak to someone who has had the mapping done after riding a while stock to give me the no bulls#&t answer on how it gets up and goes after map done. Weather sounds good cooled down in Sydney but been high 30's low 40's
 

Lucky

New member
Hi mate, I had the map installed by Procycle Dyno in Slacks Creek brissy. Fred, who owns the business is a specialist, not just someone “giving it a go”, I’ve had other bikes done by him. When I bought the bike it went ok, but nothing out of the box, so I put an akro pipe on it and took it to him. The first run on the Dyno showed 116hp but lean down low, he installed the new tune/map and dynoed it until he sorted the torque curve, fueling etc. and it came out with 122hp and arm tearing torque! I couldn’t believe it when I rode it, a totally different bike!! Definitely worth the money.
 

Raw0791

New member
Excellent it is in the 'to do' box. Have suspension being done next week. Will then look at the remap. Thanks Lucky 🍻
 

MT09_Dave

New member
Hi all, Mark (“Lucky”) here from a very warm 33deg.C Brisbane. The photo below is of my 2015 Tracer on the way to beautiful Somerset Dam, north west of Brisbane.
View attachment 5829

Bike mods include:
Andreani fork cartridges
Nitron R1 Shock
Acropovic Titanium pipe
Woolich Racing Map by Procycle Dyno - 122Hp
McCruise
OEM Heated Grips
Givi Monokey Top Box
Puig racing screen
....and lots more
Hi all, Mark (“Lucky”) here from a very warm 33deg.C Brisbane. The photo below is of my 2015 Tracer on the way to beautiful Somerset Dam, north west of Brisbane.
View attachment 5829

Bike mods include:
Andreani fork cartridges
Nitron R1 Shock
Acropovic Titanium pipe
Woolich Racing Map by Procycle Dyno - 122Hp
McCruise
OEM Heated Grips
Givi Monokey Top Box
Puig racing screen
....and lots more
Hi Lucky, I have a 2017 MT09 which I'm going to have the Woolich ECU flash done on and also install the Mccruise unit. Did you have any dramas with this combination, set up etc?
 
It is rather quiet here, which is a shame.
I was quite shocked how quiet it is when I joined a few months ago. The MT's are fairly popular bikes so I expected more of a busy forum, but there seems to be only one or two posts a day if lucky.

I'm popping in a few of my own projects anyway just to keep a history, but would be good if the forum could pick up in popularity, although I think social media is killing a lot of forums off as people prefer the ease of the likes of facebook groups etc.

Anyway Hi there, I've got the same bike and colour. Also have a Nitron shock on it which makes a huge difference to the handling.

How did you find the cartridges? I like the bike with just the Nitron anyway, but did you find the cartridges worth it for the front too?
 


Top