K-tech IDS20, Ktech 8.5N springs and fork cap tool


Mikejbry

Member
Joined
Apr 22, 2018
Messages
44
Reaction score
2
Points
8
Location
Bristol
Hi,

I am selling my Ktech IDS20 fork internals from my Yamaha MT09, they are in fantastic condition and barely used.

They suit the MT09, xsr900 and I believe the tracer 900. But please check the Ktech website for compatability with your model bike. Check my photos for part numbers if necessary.

Included is a pair of Ktech 8.5N/mm springs, the Ktech fork cap tool and a piston rod pumping tool (slightly shorter than the Ktech one, but usable).

They have barely been used, less than 500 miles in fact. I've not had time to use the bike much at all this summer, it feels wasteful to have a bike fully loaded with Ktech suspension (already sold the rear shock). All boxed as new. Only marks are a bit of anodising has a few marks as a result of adjusting the preload on the compression fork cap

I am in Clevedon near Bristol, if you would like to collect. Or I can arrange postage at your cost.

IMG_20190813_192616.jpgIMG_20190813_192318.jpgIMG_20190813_192307.jpgIMG_20190813_192300.jpgIMG_20190813_192238.jpgIMG_20190813_192232.jpgIMG_20190813_192017.jpgIMG_20190813_191850.jpgIMG_20190813_191829.jpgIMG_20190813_191821.jpg


Price wise I am thinking;
£460 for the cartridges, fork cap tool and piston tool plus postage
£60 for the springs plus postage

Or combo deal of £500 plus postage for the lot. If will be going on eBay as soon as a £1 fvf offer is advertised if it doesn't sell.

Thanks,
Mike
 
Last edited:


Top