New bike


ib1-2

Member
Joined
Nov 6, 2016
Messages
84
Reaction score
1
Points
8
Location
Tamworth
Picked up new bike today. Can anyone tell me where I can pick up an ignition wire so I can connect my Zumo 660 have connected to battery at present but would like it off the ignition. Don't want use the 12v socket I want that for something else.
 

robin

New member
Joined
Aug 16, 2016
Messages
102
Reaction score
2
Points
0
Location
Stockton on Tees UK
There are 3 sets off ignition live/ earth wire sockets behind the clocks.
Remove windscreen
Remove plate that holds windscreen.
Remove plastic panel below these . One push plastic fastener in centre and 2 each side next to cig lighter sockets.
You can now see behind clocks. There is a black plastic sleeve with 3 connectors in it.
If you haven't a the correct plug cut one off and use spade connectors.
 

TristanM

New member
Joined
May 19, 2019
Messages
2
Reaction score
0
Points
1
Location
London, UK
There are 3 sets off ignition live/ earth wire sockets behind the clocks.
Remove windscreen
Remove plate that holds windscreen.
Remove plastic panel below these . One push plastic fastener in centre and 2 each side next to cig lighter sockets.
You can now see behind clocks. There is a black plastic sleeve with 3 connectors in it.
If you haven't a the correct plug cut one off and use spade connectors.
Hi, I am wanting to do the same thing. Can one buy these plugs? What do they look like? Maybe I can match one from something that is supposed to plug in there? I hate cutting wires
 


Top