some off the gas goes from the downpipes straight out the holes.HI,
I have cut down all the external pipes but not the ones that come off the collar and go in the can. I noticed yo have drilled holes into your internal pipes. Doesn't this cause problems because where does the gas now go???????? The three internal pipes go into the can and form a seal with the pipes inside, a further seal is then made by the collar around the bore of the exit. So how does gas coming out of these holes not just get stuck somehere behind the collar????)
I only ask because i was going to drill mine until I though it might just trap the gas between the collar and internal seal.
JT
............Yeah but out of the hole to where ?? the shoulder....Never mind ha hasome off the gas goes from the downpipes straight out the holes.
Increases volume
I was thinking the same.oooooooooookay........... dude in my post I explain...... I know cutting holes etc etc etc will allow gas to escape. BUT escape where. The gas can't get out from there. That huge circle bit where the allen bolt goes, forms a seal with the exit of the can right............... Then the other side of the baffle slips in and forms a seal with the internals of the can............Meaning........ the gas that comes out of those holes can't go anywhere?????????? How can it get out when the huge "Circle bit where the allen bolt goes" is there blocking it??????????
What did cutting the external pipes off achieve ??HI,
I have cut down all the external pipes but not the ones that come off the collar and go in the can. I noticed yo have drilled holes into your internal pipes. Doesn't this cause problems because where does the gas now go???????? The three internal pipes go into the can and form a seal with the pipes inside, a further seal is then made by the collar around the bore of the exit. So how does gas coming out of these holes not just get stuck somehere behind the collar????
I only ask because i was going to drill mine until I though it might just trap the gas between the collar and internal seal.
JT
Now now ladies....!wow !!! I only wanted to see pictures of baffles modified , didn't want to start a war !!!! lol
Hey dude. I cut the external pipes that protrude out the can, the three slash cut pipes up to the large circular shoulder. This shortens the lend of the baffle pipes without impacting on the internal seal to the main body. Gave it a slightly deeper and louder tone and looks better too I think, you now get the big bore look of the pipe without the three spindly pipes protruding.wow !!! I only wanted to see pictures of baffles modified , didn't want to start a war !!!! lol JT09 did you cut the pipes off after the internal plate , the short flared pipes that fit over the internal non removable baffle ?? cheers .
I give up. I retireIt's going in the holes not out of them lol
Well said loli know exactly how it works cos i spent some time sussing it out a year ago but i cant be arsed to type it.