The vibration on my bike is becoming a pain, it occurs only on the throttle side, every time I ride I get a numb thumb and two fingers nearest the thumb within 20 minutes, the clutch side is fine with no vibes at all so I think I can safely assume nothing is loose, I have checked the handguard...
I have got the same MRA screen and it is better than standard, it looks great but the wind does get noisy around the helmet, I will get a taller screen next year and use that for touring, the MRA one is ok for general use
I have had my tracer since april and covered 3000 miles now, the fuel average on the instruments constantly reads between 62 and 63 mpg, I have just returned from a touring holiday around wales and had three tankfuls at 67 mpg, I think this is amazing, I don't ride very hard and tend to short...
I don't have any strange gearbox noises other than the loud clunk when going from neutral to first as on most bikes, I just find the gearchange notchy and not particularly smooth, my last two bikes were a Triumph Tiger sport which had a very smooth gearchange and a Suzuki Bandit 1250 which...
I have just done a 700 mile tour of mid wales with one of those throttle assist devices and can report that theyr are brilliant, they reduce vibration by way of a lighter grip on the throttle and also prevent aching tired wrist muscles, I cannot recommend highly enough
I have just finished connecting up my Garmin Zumo, not a bad job, good write up Reeseyboy, I checked out the wires and the brown was the positive, I used mini female spades pushed onto the spare socket pins, how kind of Yamaha to provide this facility
I had a look behind the screen and found two blanked off connectors next to the connector for the existing 12 volt socket, are these blanked off connectors for the additional 12 volt socket or accessories like sat nav ?
I want to wire my sat nav to the spare connector for the additional 12 volt accessories socket, I took the fairing parts off and found two blanked off connectors next to the existing 12 volt socket connection, is one of these blanked connectors meant for the additional 12 volt socket, thanks in...