OBD 2 connectivity?


Jim_Royle

Jim_Royle

0
Joined
May 24, 2014
Messages
39
Reaction score
1
Points
6
Location
Australia
Visit site
Hi All,

I notice that some bikes get to do there ECU flashes with freeware and very cheap hardware. Does the MT-09 have OBD2 connectivity?
 
unlikely that Yamaha use OBD2. A lot of the European manufacturers use it but not the Japs.
 
I think it's possible to find the USB cable and the software to read/write inside the ECU.

I've seen them in my dealer workshop and they seem to be common.
There are no licence protection on the software (key or dongle) and no partnumber on the cable.
 
olivierzx said:
I think it's possible to find the USB cable and the software to read/write inside the ECU.

I've seen them in my dealer workshop and they seem to be common.
There are no licence protection on the software (key or dongle) and no partnumber on the cable.
Click to expand...
Yep, it's the price difference that bothers me. $450 versus $15.
 
Most of the cheaper kits are for fault code reading, not writing back to the ECU.

Can you post an example of the kit you've seen?
 
Tuneecu is a free version of what Tuneboy offers for a lot of dough. KTM, Benneli and some Aprliias using the Sagem ECM can all be accessed by that software. It's very useful for interrogating fault codes.............. mainly because the ECM light comes on for no good reason, and often cannot be reset without the software.

Newer triumphs like the Tiger 800 record if the ECU has been accessed using a non Triumph tool to show that you've invalidated your warranty.
 
youngy said:
Newer triumphs like the Tiger 800 record if the ECU has been accessed using a non Triumph tool to show that you've invalidated your warranty.
Click to expand...

wrong you can access the new triumphs using " dealertool " although will only allow service light reset , fault code diagnosis and reset and throttle body balance and ABS bleed , but no fuel / ignition timing map changes allowed


Sent from my iPhone using Tapatalk
 
pleased to make your acquaintance too. yes I forgot about Dealertool.

Tuneecu comes with a warning to that effect...... I didn't make it up.
 
Last edited:
You must log in or register to reply here.


Back
Top