Hi there, got a hopefully simple question for the Forum, are the Tracer front discs "handed" or are they both identical ? Thanks for your help, cheers, Mike
Hi Russ, yes it's still available and it retains the centrestand., hopefully as shown in this photo (if it uploads OK !) can email more photos if required, cheers, Mike
Hi chaps, with both baffles in it's nicely deep and throaty, but not offensively loud, MUCH nicer than stock with a lovely howl at the top end of the revs. With one baffle removed it's more of the same but a bit louder, then with both baffles removed it sounds just like the Akra with its baffle...
Hi there, up for sale is the superb IXIL Hyperlow full exhaust system for the MT-09 and Tracer. It is made in brushed stainless throughout, with polished stainless twin-outlet pieces. The silencer has two removable baffles (one on each outlet, both baffles can be fitted, or only one fitted, or...
Well, I finally got round to fitting standard MT-09 handlebars to my Tracer and I'm pleased with the results, they are a very similar shape but are 2" narrower overall (1" each end) and for me give a more natural riding position. Required new holes drilling for the controls but straightforward...
Hi Medwyn, just seen your Tracer seats on the MT -09 forum and if they're still available I'll have them please. Can do bank transfer or PayPal whichever you prefer, also sent you a text, cheers, Mike
By way of an update, the second set of L brackets arrived and aligned better than first set but I still needed to drill out the 10mm holes to 12mm to allow me to fit them to the bike ! A bit poor IMO. However after 2 weeks hooning around Spain and Portugal I can report that the Tracer Ventura...
Hi there, I have a Tracer and originally I just fitted the Kevs O2 Controller and this does help with low down fuelling but for me didn't cure it altogether. However I have now removed the O2 controller and I sent my ECU to Simon at S-Tech who has re-flashed it with a map to suite my mods (IXIL...
Eyup fine Tracer chaps / chappesses, just wondering if any of you have tried any different non-standard handlebars on your Tracer ? I'm considering changing mine for something a wee bit narrower and possibly with a little more "pull back" so the bar ends are angled further towards the riser...
Thanks for the replies chaps, I've fitted the Ventura stuff to FZS1000, Daytona 955, Speed Triple, FZ1s, Tuono and Tiger Sport without hassle (well maybe a little filing of the mounting holes on occasion), so was a bit frustrated when the Tracer ones were so far out, especially as I bought new...