Search results

Does anyone know if the studs should be thread locked in to the wheel ??

Managed to prise the bike out the garage and get out on a ride for an hour, first time for 5 weeks. A few photos of the finished paint work.

I did ask them for the code, their reply was that it was unique to them, which doesn't help anyone unless they go to Dream Machine and let them do the paint.

At the recent bike jumble at Stafford, i got talking to the guys from Dream Machine about matching the MT-09 Blazin orange paint, they informed me they have done, as they do the paint for a Plastic parts company that do plastic parts for the MT-09. A week or so later i was passing Dream Machine...

Thanks guys, looks like the Abba stand is the way to go

Can anyone recommend a front paddock stand that suitable for the MT-09 fitted with ABS.

Sooner than to late, I've had fitted PR4's front and rear, the back wheel no problem took that one in loose, but I had to ride the bike to the garage to get the front one changed as the front paddock stand I have won't fit the bike, the ABS brackets are in the way, (new thread) Had a ride out...

Anybody know where I can get a set of front foot rests, as those fitted to the Tracker ??

50mph, what's that, anything less than ???mph won't do, LOL

Running original Dunlop Sportsmax D214's front and rear, about 1mm to go before replacement on the rear, having done 5300 miles

I can see from your photos that the stays I've fitted to my bike, are not for a MT-09, yours look to hang a lot lower as the reservoir is well clear, as there is no part number on them, I'm unable to establish which bike these would fit so i'll have to nip down to me local yam shop and see if...

I thought that but the stay is shaped, thus not allowing the stay to fit between the reservoir and the pipe.

Have put new spacers on, these are 20mm long and painted same colour as the frame, although the reservoir is touching the stay, there is no tension on the reservoir bracket. . . .

When you tighten it up without the spacers the reservoir bracket bends and the pipe gets trapped, I now have some deeper spacers, which when fitted should leave a small gap between the reservoir and the stay. As for the right stay for the bike, I don't know as I can't see a part number. these...

Did you have the same problem with the stays ?? The seat was done by PP seats B/ham

Managed to get them fitted, I made some spacers 20mm diameter x 15mm long but they could be 20mm long as the reservoir is touching the stay, and are put together with 40mm button head set screws (50mm for the demo) . . .

No spacers with the stays, I got the set up of ebay, will try and fit the near side later and see what that looks like, i'll try to take some pics and post later

Haven't tried to fit the near side yet, still trying to see why the offside won't fit, it seems that the reservoir is in the way.

Has anybody fitted genuine Yamaha panniers to their 09 using the stays ?? I've acquired some, but it seems that the rear foot rests have to be removed in order for them to fit, not much use if you want to take a pillion. :confused:

I noticed that you've removed the rear foot rests, is that the stays would fit properly ??