bracket

Right, this isn't at all embarrassing! I had my Akra fitted last week, they insisted on leaving the baffle in. obviously I removed this as soon as I got home, I dropped the retaining screw into the exhaust. "Bother!" I thought, So started the bike with a towel behind the exhaust to catch the...

Hi all I have had my tracer for just 18months and love the bike. I have noticed rust on the bracket that hold the screen and headlamp adjusters. Also rust on the bracket that holds the rear brake fluid pot and bracket that holds the number plate. Am I doing something wrong? Is anybody else...

I was unsatisfied with the location of the dash so i designed a bracket... this bracket puts the dash 25mm to the left so the brake fluid container cannot touch the dash when handlebar is set forward also looks much better this way - lasercut - made of stainless steel - powdercoated - angled...

This either happened after 1st service or for gearbox recall, I imagine it was when tank lifted they pulled it up high instead of disconnecting the drain pipes and then didn't ensure back down properly seems like they are caught on something under tank. I have a pic when got bike showing them...

Bought an r&g tail tidy. Should the indicators have spacers ? My standard indicators fit into the bracket, but wobble a bit. Thanks

Getting these next week and rad cover once back in stock. I take it that its simply a case of removing one bolt at a time and one side loosely add one bolt to bracket then remove 2nd one and add bolt through bracket then do other side? Is engine likely to move any? have done it on many bikes...

After fitting the rear rack i felt the tail light became to obstructed for other road users. I made up a bracket and extended the wiring loom 270mm and relocated the bracket under the back of the rack. Photo attached.