i got one gathering dust was going to cut out a section on the top to see how far the main pipe goes into the box. nice one.this came today, all the way from Ohio, a bargain at £138 including post and import duty
View attachment 2440
a lot of cutting and welding, some perforated tube, wadding, black paint and carbon fibre to follow
that is 100% THE SAME AS I want to do, every time i go in the garage i look at it and think the same.plan is to cut about 100mm out of the middle leaving just 1 bracket (nearest the heatshield), gut everything, weld in some perforated pipe, surround it with wadding and weld the far side back on, making the whole box about 1/2 the size of the original.
might remove some from the bottom so it's level(ish) with the bottom of the heatshield, all depends on what we find inside.
I will take picks of everything... if I remember
nope, it's not that complicated though, now I've done it that isThanks for that. Its clearly not a simple job of drilling out the baffle then!
only if it feels like it needs it, a custom map that is, it will go on a dynoI understand that you will put mt on the dyno and get a custom map done. Right??
that's the idea Lee, I like the look of the stock pipe although it will have some colour changes when finished,Interesting is the aim to keep the stock pipe and looks but liberate a bit of noise/power?
Ripping, I like the tail pipe and down pipes but that huge bulge is not best, but then if this is costing you not very much cant complain!that's the idea Lee, I like the look of the stock pipe although it will have some colour changes when finished,
my mate recons it will be very loud as there's no room for a DB killer... good thing or not ? we shall see