Stuggesjoerd
New member
Rear shock ZX6RR 2006 & ZX10R 2010 and possible hyperpro progressive front springs
Dear all,
The past year I had my mind sorted on fixing the suspension.
Started with a ZX10R, and changed to a ZX6RR shock once I found one online.
However, the girlfriend is not really enthusiastic to hop on behind with all these DIY changes.
Meaning I am going to change towards a proper aftermarket solution, where I can easily adjust en change the settings when riding pillion.
This results in that a few components in excellent state will come available.
I am changing out everything in the end of this year, meaning the ZX6RR and hyperpro front are both still mounted on my bike.
Before posting them on fleebay or the dutch version (marktplaats) or on the dutch forums, I wanted to check the interest here first.
As I can imagine certain people here are looking for the ZX6RR shock with much energy. If people are interested I will put it as reserved.
ZX6RR shock; 150 euros as suzuki parts are included. without the parts 120 euro.
ZX6RR shock from 2006 completely rebuilt/revised by a local suspension shop (jd-shocks in the netherlands).
SUZUKI PARTS for fitting without drilling are also with this part. As it is fitted now according to the explanation on the FZ forums. ( meaning with suzuki parts to fit the 10mm hole)
Standard ZX6RR spring but only painted blue to match my MT-09 race blue.
ZX10R; 80 euro
ZX10R shock from 2010. I even made a component on the CNC machine which can be placed underneath the spring to gain more preload. (loose supplied).
The holes are drilled to 12mm so they fit the MT-09. Low amount of KM's on the shock.
Progressive hyperpro springs 100 euros
With the new kit, new front springs will be delivered also. Meaning I have an extra set of progressive hyperpro springs made for the MT/FZ-09 available.
No oil obviously.
Status:
ZX6RR ; Sold
ZX10R ; Sold
Hyperpro progressive front springs ; Sold
Dear all,
The past year I had my mind sorted on fixing the suspension.
Started with a ZX10R, and changed to a ZX6RR shock once I found one online.
However, the girlfriend is not really enthusiastic to hop on behind with all these DIY changes.
Meaning I am going to change towards a proper aftermarket solution, where I can easily adjust en change the settings when riding pillion.
This results in that a few components in excellent state will come available.
I am changing out everything in the end of this year, meaning the ZX6RR and hyperpro front are both still mounted on my bike.
Before posting them on fleebay or the dutch version (marktplaats) or on the dutch forums, I wanted to check the interest here first.
As I can imagine certain people here are looking for the ZX6RR shock with much energy. If people are interested I will put it as reserved.
ZX6RR shock; 150 euros as suzuki parts are included. without the parts 120 euro.
ZX6RR shock from 2006 completely rebuilt/revised by a local suspension shop (jd-shocks in the netherlands).
SUZUKI PARTS for fitting without drilling are also with this part. As it is fitted now according to the explanation on the FZ forums. ( meaning with suzuki parts to fit the 10mm hole)
Standard ZX6RR spring but only painted blue to match my MT-09 race blue.
ZX10R; 80 euro
ZX10R shock from 2010. I even made a component on the CNC machine which can be placed underneath the spring to gain more preload. (loose supplied).
The holes are drilled to 12mm so they fit the MT-09. Low amount of KM's on the shock.
Progressive hyperpro springs 100 euros
With the new kit, new front springs will be delivered also. Meaning I have an extra set of progressive hyperpro springs made for the MT/FZ-09 available.
No oil obviously.
Status:
ZX6RR ; Sold
ZX10R ; Sold
Hyperpro progressive front springs ; Sold
Last edited: