Aussie ECU part number

[sporti]

That's a good start, that's 1 of the 3 things I was asked for confirmed.

Nice work, thanks [MENTION=259]tox[/MENTION]

 

[Schultzy]

[MENTION=259]tox[/MENTION] [MENTION=313]sporti[/MENTION] - a bit of Friday night tank removal - see below.

Sorry its a bit blurry, darn phone wouldn't focus properly, especially on the pins. Let me know if you need more?

 

[tox]

Good work. Schultzy

 

[sporti]

[MENTION=259]tox[/MENTION] [MENTION=313]sporti[/MENTION] - a bit of Friday night tank removal - see below.

Sorry its a bit blurry, darn phone wouldn't focus properly, especially on the pins. Let me know if you need more?

View attachment 857View attachment 858

That's gold mate.

I have confirmation that the MT-09 ECU can be done in Perth. They only need the ECU for 24 hours & the cost is $495.

 

[stunva]

For $495 what do they do ?

Do the same thing Stoltec does for $125 in the US ?

Can you tell me what they actually do.

 

[sporti]

https://www.facebook.com/ECUwest

check this out.

 

[stunva]

I wonder if there's an ecunleashed dealer on the east coast that can do it.

Worse case we send it to Perth. They are still more than double the price for the same service in the US though...........as is everything in this continent.

When will you get yours done ?

 

[Schultzy]

Nice - good gains on torque throughout, power gains seem to be at high end hey.

Sent from my HTC_PN071 using Tapatalk

 

[marthy]

For $495 what do they do ?

Do the same thing Stoltec does for $125 in the US ?

Can you tell me what they actually do.

I had my bike all tune with the EJK controller for my exhaust. I did the Stoltec flash also. That complete the fine tune well ajd worth $125. Doesn't work $500 IMO.

With the controller and CO adjustment that some of you have (we don't) it should be plenty enough tuning. Here in the US at $500 we get the plug and everything to do it ourselves.

Sent from my SAMSUNG-SGH-I337 using Tapatalk

 

[stunva]

What's the CO adjustments ?? What have I missed here ?

 

[Credry]

What's the CO adjustments ?? What have I missed here ?

You can adjust the CO values of each cylinder through the diag menu on the dash to richen up the mix as she runs a wee bit lean...

 

[stunva]

Have you got a link to how to do this ?

 

[Credry]

Have you got a link to how to do this ?

there is a thread in the technical section "changing the co settings"

 

[stunva]

How'd I miss that ??????, thanks.

 

[Schultzy]

You can adjust the CO values of each cylinder through the diag menu on the dash to richen up the mix as she runs a wee bit lean...

This only applies for the first 2% of throttle doesn't it?

Sent from my HTC_PN071 using Tapatalk

 

[sporti]

I'll still be a few weeks away at the earliest to have the ECU done.

It's at the top of my priority list, just need to get myself organised.

 

[stunva]

It'll be good to see how it goes, you know you're our guinea pig don't you !!

 

[sporti]

Haha

I figured as much. It's all good, after putting the legwork into finding someone to develop the software, it'd be a waste not to use their services.

I'll post up closer to the point in time.

 

[sporti]

I have requested a date for the flash, 14/04.

Just waiting for this guy to provide confirmation, but I'm good to go subject to his availability.

 

[sporti]

I've just received confirmation for the week of the 14th.

I'll post up an initial review & another a couple of weeks in, once completed.