Colin Briffett
New member
- Joined
- Nov 22, 2015
- Messages
- 36
- Reaction score
- 1
- Points
- 0
Yeh that's what I thought anyway tt cheers mate!
I can confirm that on new 2016 it is not possible to access DIAG/CO menu by holding 2 buttos down.Anyone else got a 2016 MT09 who can either confirm or deny if the DIAG/CO is acceptable by holding the 2 buttons down and turning the ignition on?
Interesting. Why is that? Glad I've the option to change it. I've played about with settings, but reset all 3 cylinders to 0, as the engine is stock.You will not be able to access the DIAG/CO settings via the dash on any 2016 Yamaha bike now unless you have the official diagnostic tool
I think the obvious difference between 2015 and 2016 models is that the later one has traction control.I've got a 2016 registered Tracer which i can change the CO settings on. Does this mean i have a 2015 model bike??
No harm but if you want to get the best of your engine you must adjust the CO at a specific number for eachone of the 3 cylinders.I have a 2015 FZ09 and I installed and M4 slip on exhaust. What I'd be running my CO @+14 and if I do will it harm anything? Thanks