hi
Don't ask me how but on checking the bike this evening one of me bolts and spacer are gone. I have a brand new rack and v35 that I will only be able to use on one side of the bike. part no.s as follows:V774R for spacer and TSPXT M8x40 for bolt.
any help will be greatly received
Thought I'd share this link off You Tube.
https://youtu.be/7IgrZ_lH3fc
its about a guy here in England who was riding one day and his top box fell off.
He admits it was a cheap imported one, but just in case I've put a bolt through the bottom of mine with a locking washer and wing nut.
It...
Hi - Has anyone experienced any trouble at all with fitting the Evotech radiator cover please?
Here's what's happening with me: The cover arrived warped in a springy way. I can flex it straight, then when released reverts to being warped. Not a problem I don't think.
Then, having the Street...
So I spent a few minutes studying the shock and linkage area before beginning and though I wasn't sure how it'd pan out I went ahead with a plan to replace the shock without having to remove the linkage entirely or the exhaust. Removing the exhaust would have made this much easier but I didn't...
My Tracer is 3 months old and I've done 2,000 miles. Cruising down the motorway last week, the left hand handlebar end bolt and spacer flew off, leaving the hand guard flapping in the wind.
Luckily my dealer here in the UK is excellent (Peter Hammond in Cirencester) and he replaced it...
Can anyone help?
Had a puncture in my rear tyre. Took the wheel out and had it repaired and refitted the wheel with no issues. However the rear calliper does not want to line up properly and I cant get the brake to pump up. The calliper is not square and rocks rather than slides on the pins. If...
well finally fitted the Yamaha genuine side stand foot !! then took it straight back off !!!!!! the fitting was a nightmare I had to really bend the top plate so it didn't strip the bolt thread holes in the aluminium base trying to tighten it on , one bolt was directly under the stand bar so...
Who has a workshop manual, and could kindly let me know the torque setting for the oil cooler bolt. I beleive its a 36mm bolt. Thank you in advance. Andy
why the feck don't they supply it with all 3 bolts of correct length ?
1 OEM bolt goes back in which is now 3 or 4mm shorter than it should be so, being the ham fisted fucker that I am, the slightest over tightening of that bolt results in a de-thread and an unsecure fan mount :(
off to find the...
Getting these next week and rad cover once back in stock. I take it that its simply a case of removing one bolt at a time and one side loosely add one bolt to bracket then remove 2nd one and add bolt through bracket then do other side?
Is engine likely to move any? have done it on many bikes...